Principle:
Upset hoist bring mould base body sky 90 of upset is it cut car to put together, drawing of patterns is it at cutting car , cut base body with side board car power by electrical machinery and walk to stay, finish cuts vertically , mills the trough , level to cutting through cutting the device vertically; Cut the car and continue walking after the central position of the crosscut device stops, the crosscut device is started, crosscut shelf from top to bottom vertical to is it is it finish horizontal to cut to cut to lay; Cut car walk to organize into groups hoist place organize into groups hoist hang to is it raise car to steam base body (incline board in succession ) again, cut car return to primitive position carry on next to cut circulation.
Character：
1. the model structure is simplified practically, the maintenance easy to install;
2. The base body side sets up and puts and makes the width of base body 600mm, the height is 1200mm, cuts the steel wire short, difficult to break, it is difficult to float, it is high to cut the precision;
3. The vertical cutting equipment is regular, cut the small garage and leave and finish cutting vertically , cut time short. Crosscut device adopt steel wire cut under the level, is it cut steel wire length to shorten , guarantee precision of cutting。
4. Base body side can vertical to is it mill trough to finish when cutting after setting up, is it mix notch process the equipment separately to need;
5. Copies of model make to base body six cut , products quality does not out of shape to influence mould mould oil have;
6. A model can also produce the panel besides producing the building block;
7. Model cut course (upset , vertical cut , crosscut ) is it finish with the Engineer location to divide, every engineering location work simplification, operate and maintain it conveniently. |
